Safety shoes size chart: how to pick the right UK size

By The RigArmor Team · Last reviewed: 17 November 2026

Short answer: Measure both feet in the work socks you wear on site, and use the larger foot. CCOHS suggests about 12.5 mm of room past your toes. It also suggests trying boots on around midday, when feet have swelled. Sizes vary by brand, so use each maker's chart. The Walkmaster Xenia comes in UK 4–12 and the Quebee Xenic in UK 6–12.

The common mistake is ordering a crew's boots from the sizes people say they wear. Everyday trainers and safety shoes don't always match. A steel toe cap doesn't stretch, so a tight pair stays tight.

This guide covers how to measure, the size chart for the two safety boots we list, and how to collect sizes for a whole crew.

A storeman in khaki coveralls kneels to measure a seated worker's foot in a dark work sock on a sheet of paper, with plain black safety boots beside them.

Illustrative image only. Not a RigArmor product, customer or site.

How to choose your safety shoes size: measure first

  1. Pick the time. Measure around midday. CCOHS notes that "Feet normally swell during the day."
  2. Wear work socks. Use the socks and any insoles you wear on site.
  3. Stand on paper. Heel against a wall, weight on the foot.
  4. Mark the longest toe. Keep the pen upright.
  5. Measure the length. Wall to mark, in millimetres.
  6. Do both feet. Use the larger one.

Then check that length against the maker's chart. If the maker gives no length chart, try the boots on.

Safety shoes size chart: Xenia and Xenic

Sizes vary by brand, so use each maker's chart. These ranges are copied from each listing.

Table 1: Xenia and Xenic sizes, per each listing, checked 2 November 2026
Boot UK sizes listed EU range stated on the listing
Walkmaster Xenia slip-on (pull-on) boot UK 4, 5, 6, 7, 8, 9, 10, 11, 12 EU 37 to 46; UK 7 = EU 41
Quebee Xenic lace-up boot UK 6, 7, 8, 9, 10, 11, 12 (no UK 5) EU 39 to 46; UK 7 = EU 41

Neither listing gives an EU size for each UK size or a foot length chart, so we haven't added one. Both boots are sold by the pair.

The Xenic starts at UK 6, so a UK 5 worker needs the Xenia.

Toe room and fit with a steel toe cap

Both boots have a steel toe cap and a steel midsole. A steel toe cap won't stretch, so your toes shouldn't touch it.

CCOHS guidance on safety footwear says toes "should be about 12.5 mm from the front", and "Do not expect footwear to stretch with wear." It also suggests walking in new boots to check they're comfortable.

When trying a pair on:

  • toes free to move, not pressed against the toe cap;
  • heel held, with little lift as you walk;
  • no pinching across the widest part of the foot.

Fit varies from person to person. Check with the wearer after a short walk, not just standing.

We don't currently list composite-toe boots. Our post on steel toe vs composite toe explains the difference.

Ordering sizes for a crew

Collect one measured length and one UK size per worker. Don't rely on what people remember.

Table 2: Crew size worksheet
Name Foot length (mm, larger foot) UK size Boot style Notes

Worksheet tips:

Check sizes against the listing at order time. Ships in 2–4 working days. Singapore delivery takes 1–3 working days after dispatch.

Wrong size? Exchanges and returns

Wrong-size boots can be returned for an exchange. You pay postage both ways, to and from our warehouse, and a 15% restocking fee applies.

See our returns and delivery FAQ.

FAQ

Should safety shoes be a size bigger?

Not by default. Measure your foot in work socks and pick the size that leaves room past your toes. CCOHS suggests about 12.5 mm. Going up a size may leave your heel loose. Use the maker's chart and try the boots on where you can.

How much toe room should safety shoes have?

CCOHS says toes should be about 12.5 mm from the front. With a steel toe cap, your toes shouldn't touch the cap. The cap won't stretch, and CCOHS says not to expect footwear to stretch with wear.

How do UK and EU safety shoe sizes convert?

It varies by brand, so use each maker's chart, not a general converter. Our Xenia listing states EU 37 to 46 for UK 4–12, and the Xenic EU 39 to 46 for UK 6–12. Both state UK 7 = EU 41. See Table 1.

Do Xenic boots come in UK 5?

No. The Quebee Xenic comes in UK 6–12. If you need a UK 5 or UK 4, the Walkmaster Xenia comes in UK 4–12.

Should I measure in the morning or afternoon?

Around midday. CCOHS suggests trying new boots on around midday, because feet normally swell during the day. Measure in the socks you wear at work.

Can I return safety shoes if the size is wrong?

Wrong-size boots can be returned for an exchange. You pay postage both ways, to and from our warehouse, and a 15% restocking fee applies. See our returns and delivery FAQ.

In short

Measure both feet in work socks, around midday, and use the larger one. Leave room past your toes. Use each maker's chart. The Xenia is UK 4–12; the Xenic is UK 6–12, with no UK 5.

This is general guidance, not legal advice. Your employer's risk assessment decides the footwear your site needs. Check with your WSH officer.

Ordering for a crew? Email sales@rigarmor.com with your sizes.

Sources

  • CCOHS, OSH Answers: Safety Footwear: https://www.ccohs.ca/oshanswers/prevention/ppe/footwear.html
  • RigArmor listings (read 2 November 2026): /products/walkmaster-xenia-slip-on-ankle-safety-boot and /products/quebee-xenic-lace-up-ankle-safety-boot